Dyna-Plex 21C Synzol Synthetic Manual Transmission Fluid is recommended for applications where heat and wear present major problems. These applications include manual transmissions where GL-1, GL-2, GL-3, and GL-4 type fluids are required.Dyna-Plex 21C Synzol is a full synthetic designed for today's transmission syncronizers and is formlated for years of trouble free shifting.
Dyna-Plex 21C Synzol meets Eaton and Meritor 750,000 mile extended warranty requirements, allowing users to go 500,00 miles between drains in Eaton, Meritor and Mack Transmissions. Available in 50 W, Dyna-Plex 21C Synzol Synthetic Gear Oils meet or exceed the following test or requirements:
- - API Service Classification GL-1, GL-2, GL-3, GL-4, MT-1
- - Eaton Corporation PS164 & PS081
- - International TMS-6816
- - Mack TO-A Plus
- - Meritor Extended Drain 0-81
- - Volvo STD 97305
Universal Multipurpose Automatic Transmission Fluid (ATF) provides the highest possible heat and oxidation protection for automatic transmissions of automobiles and light duty trucks. It is the one fluid you need for most applications, allowing you to reduce the number of products you need to inventory. Universal Multipurpose ATF offers excellent low temperature performance and improved protection against high temperature deposits in heavy duty service. It has excellent corrosion and rust preventive properties, as well as rigid anti-foam characteristics. It will not cause excessive seal swell or shrinkage, nor will seals excessively harden or soften. Universal Multipurpose Automatic Transmission Fluid meets or exceeds the following tests and requirements*:
- - Allison -- C-4, 30822004
- - Audi
- - Pre-2006 applicable GM automatic transmissions
- - Pre-2007 applicable Ford automatic transmissions
- - General Motors -- GM-6137-M, D-25196, D-21337
- - GMW
- - Mercedes-Benz
- - Peugot
- - Voith
- - Volkswagen
- - Volvo
- - ZF
Universal Multipurpose Automatic Transmission Fluid can be used as an alternative with:
- - Caterpillar TO-2
- - Denison Hydraulic Pump System
- - Dexron IIE, Dexron III
- - Ford ESP-M2C138-CJ, M2C166-H
- - Sunstrand Hydraulic Pump System
- - Vickers Hydraulic Pump System
*NOT RECOMMENDED FOR TRANSMISSIONS REQUIRING FORD TYPE F ATF
Dyna-Plex 21C TO-4 Transmission Oil was designed to enhance Caterpillar
transmission and final drive life. This product is designed for new Caterpillar
machines and has been field tested to show an increase in transmission disc
life up to 45%. Dyna-Plex 21C TO-4 Transmission Oil is primarily intended
for power shift transmissions, clutches and brakes, final drives, bevel gears
and differentials, and other such drive train components. It is formulated
with a thermally stable chemical package which provides oxidation and anti-wear
properties that increase the life of the bronze friction discs by demonstrating
less slip. This increases the load carrying capacity of the clutches above
that of a typical qualified engine oil. Available in SAE 10, 30, 50. Dyna-Plex
21C TO-4 Transmission Oil meets or exceeds the following tests and requirements:
- - API Service Classifications -- CD, CF, GL-1, GL-2, GL-3
- - Allison -- C3, C4 (10 & 30 wts only)
- - Caterpillar -- TO-2, TO-4
- - Komatsu Micro Clutch
Universal Trac Gard may be used in hydraulic systems alone, or in combination hydraulic-transmission systems and is recommended for most makes of tractors. Trac Gard's distinctive blue color aids in leak detection and reduces the chance of misapplication. Specially formulated to be oxidation and rust resistant, Trac Gard protects gears and bearings even in extreme applications. Its multi-viscosity ensures superior pumpability at low startup temperatures and provides excellent body at high operating temperatures. Universal Trac Gard meets or exceeds the following tests and requirements:
- - ABEX/Denison -- HF-0, HF-1,HF-2, All pumps
- - AGCO/Duetz-Allis/Allis Chalmers -- 25743 ( Power Fluid 821) 257541, 246634, 272843
- - Allison -- C4
- - Caterpillar -- TO-2
- - Clark Lift Truck Transmission Fluid -- TA 12, TA 18, HR 500, HR 600
- - Dresser Construction -- Trans/Hydra Fluid
- - Duetz -- Hydraulic Transmission Fluid
- - Ford -- ESN-M2C134-D&C, ESN-M2C86-B, ESN-M2C134-B, ESN-M2C53-A, ESN-M2C48-B, ESN-M2C41-B, FNHA-2-C-201.00, FNHA-2-C-200.00
- - Hesston Fiat -- Oilofiat Tutela Mulfi-F
- - International Harvester -- MS-1207 (Hy-Trans Plus*), B-6 (Hy-Trans)*, B-5
- - J.I. Case -- MS-1209, MS-1207 (Hy-Trans Plus*), MS-1206, MS-1210 (TCH), MS-1205, MS-1204, JIC-185, JIC-145, JIC-144, JIC-143
- - John Deere -- J20C/D(Hy-Gard); J21A, J14C, J14B (303 Fluid)
- - Kubota -- UDT
- - Landini -- Tractor II Hydra Fluid
- - Massey Ferguson -- M-1141 (Permatran III), M-1129A (Permantran), M-1110, M-1127A/B, M-1135, M-1143
- - Oliver -- Type 55, Q1802
- - Plessey-Sunstrand -- Hydraulic Fluid
- - Sperry Vickers -- 1-286-S, M-2950-S
- - Stieger -- SEMS 17001 (Hydraulic Transmission Fluid)
- - Sunstrand -- Hydrostatic Transmission Fluid
- - Versatile -- Gear and Hydraulic Transmission Fluid, ESN-M2C134-D, FNHA-2-C-201.00
- - White Farm -- Q-1826, Q-1766B (HTF)
For more information, or for a complete list of our Transmission Oils, please contact us.
Universal Lubricants is a trademark of Universal Lubricants, Inc. and the Universal logo is a registered trademark.
All other trademarks are the property of the respective companies.
Telephone: 800-444-OILS Fax: (316) 832-0301
The URL of this page is http:\\www.universallubes.com\transmissionOils.htm